Fully Tuneable from 2,800 K - 10,000 K
Vibrant Colour Selection (RGB+W Colour Gamut)
High Colour Rendering
Low Power Consumption (420 W Nominal)
Tremendous Output - Brighter than 2kW Tungsten Soft Light
Fully Dimmable from 0 - 100%
Lightweight and Compact
Beautiful Soft Beam of Light
Interchangeable Diffusion Panels
Wide Range of Accessories Available
Thin Profile
On-Board Battery Connection (23 - 36V DC)
Onboard Simple Control Panel
Onboard DMX In and Out
RDM Implementation
USB-A Connection for Firmware Updates
EtherCon port for network connectivity
Available in Blue/Silver and Black
Fan Mode Selection
External Lightweight PSU
powerCON TRUE1 Power Connector
Lamphead S60-C
Optical System Soft Diffusion Panel
Light Aperture 645 x 300 mm / (25.4 x 11.8 inches)
Beam Angle 115º (Half Peak Angle)
Weight Manual Version: 11.7 kg (25.8 lbs)
Pole Op Version: 12.8 kg (28.1 lbs)
Handling Steel Yoke, High Strength Tilt Lock
Pole Operation Option (Pan & Tilt)
Mounting 28 mm Spigot (Junior Pin)
Tilt Angle +/- 90º
Lamphead Voltage Input 48 V DC
Power Consumption 420 W Nominal, 450 W Maximum
Lamphead Power Connection Male 3-Pin XLR - 15 amp (Pin 1: Negative / Pin 2: Positive)
Battery Connector Male 4-Pin XLR - 10 Amp (Pin 1: Negative / Pin 4: Positive)
Battery DC Voltage Range 23 - 36 V DC
Battery Mode Light Output 50% of Total Output
White Light 2800K - 10000K Continuously Variable Correlated Colour Temperature
Coloured Light Full RBG+W Colour Gamut with Hue and Saturation Control
Colour Temperature Tolerance +/-100K (nominal), +/-1/8 Green-Magenta (nominal)
Colour Rendition CRI Average > 95
TLCI Average > 90
Green-Magenta Adjustment Continuously Adjustable (Full Minus green to Full Plusgreen)
Dimming 0 - 100% Continuous
Control On-Board Controller, 5-Pin DMX In and Through, EtherCon LAN Network Connectivity, USB-A
Remote Device Management (RDM*) DMX Setup, Hour Counter and Standard RDM Commands
Software Interface Ethernet: DMX Setup, Fixture Status and Firmware Upgrade Through PC, Mac USB-A: Software upgrade via flash drive
Housing Colour Blue/Silver, Black
Ambient Temperature Operation -20 - 45ºC (-4 - 113ºF)
Protection Class IP 20
Estimated LED Lifetime (L70) 50,000 hours
Estimated Colour Shift Over Liftetime +/- 5% K
Certifications CE, CB, ENEC, cNRTLus, FCC, PSE
Power Supply Unit S60 PSU
Power Supply Input Range 110 - 240 V AC, 50/60 Hz
Power Supply Output Range 48 V DC
Power Input Connection powerCON TRUE1 (Bare Ends / Schuko / Edison Cables Available)
Power Output Connection Female 3-Pin XLR - 10 Amp (Pin 1: Negative / Pin 2: Positive) powerCON TRUE1 (mains power through)
Weight 3.5 kg (7.7 lbs.)
Dimension 383 x 192 x 90 mm (15 x 7.6 x 3.5 inch)
Control On-Board On/Off Switch
Mounting Super Clamp Attachment / SkyPanel PSU Rail Mount
