- Camera Gimbal
- 1x Ronin 2 Gimbal
- 1x Grip
- 1x Remote Controller
- 2x TB50 Intelligent Battery
- 1x TB50 Battery Mount
- 1x Battery Charger
- 1x Battery Charger Power Cable
- 1x Quad Charging Hub
- 1x Ronin 2 Power Hub
- 1x Camera Top Cross Bar
- 1x Camera Base Plate
- 1x Accessory Mount 115mm Rod
- 1x 15mm Focus Rod Mount
- 1x Ronin 2 Universal Mount
- 1x Top Mounting Block
- 1x MotionBlock
- 1x Neck Strap
- 1x Water Tight Protective Case (with custom foam)
- 1x Accessories Package (Screws and Hex Keys)
- 1x ARRI Alexa Mini Power Cable
- 1x ARRI Alexa Mini Start/Stop Cable
- 1x RED Power Cable
- 1x RED RCP Control Cable
- 1x Ronin 2 Power Cable
- 1x 2-pin Power Cable
- 1x DC Power Cable
- 1x Triple P-TAP Breakout Box
- 1x SDI IN Cable
- 1x SDI OUT Cable
- 1x USB Type-C Data Cable
- 1x UART to D-BUS Cable
- 1x Multi Tool
- 5x Camera Screw 3/8-16
- 5x Camera Screw 1/4-20
- 8x Screws M4-10
- 4x Screws M4-14
- 4x Screws 1/4
DJI Ronin 2 is a professional 3-axis handheld gimbal that is highly compatible with cable cams, drones, cranes, Steadicams, and more. Its customisable mounting modes such as handheld, Car Mount, Aerial, and Tripod mode help the Ronin 2 work accurately in different shooting scenerios. Also, it new Pan Lock mode has been specifically designed for work with Steadicam.
The DJI Ronin 2 is the sucessor to the DJI Ronin. It is the prefect camera stabilization to meet all your needs whether they be handheld or mounted on a vehicle, cable system, Steadicam or drone. The DJI Ronin 2 supports upto 30lbs in payload capacity making it easy for you to use a variety of cameras and lens. So if one day you need to use your DSLR and the next your Sony FS7 you're set to go with this versatile gimbal.
Like Ronin, Ronin 2 was designed for handheld camera applications. Now, Ronin 2 is more versatile with aerial, car-mounting, cablecam, and Steadicam capabilities. It is also compatible with a large number of professional cinema cameras and accessories like sunshades and filters.
Higher-torque motors allow Ronin 2 to support an increased payload of approximately 30 lbs (13.6 kg), while new stabilization algorithms combine data from multiple sensors to perform smoothly in high-stress environments.
For more reliability and convenience, new features include a dual-battery system, built-in screen, adjusting knob, GPS algorithm, camera control system, and power system. These provide Ronin users with unmatched stability, power, and reliability.
The DJI Ronin 2 is the sucessor to the DJI Ronin. It is the prefect camera stabilization to meet all your needs whether they be handheld or mounted on a vehicle, cable system, Steadicam or drone.
The DJI Ronin 2 supports upto 30lbs in payload capacity making it easy for you to use a variety of cameras and lens. So if one day you need to use your DSLR and the next your Sony FS7 you're set to go with this versatile gimbal.
- Its carbon fiber structure makes the Ronin 2 lightweight, strong, and functional. Upgraded high-torque motors support payloads of 30 lbs.
- A new mechanical design makes camera mounting and balancing easier while optimizing accuracy. New axis locks improve usability, and its extendable roll axis allows the Ronin 2 to support more cameras.
- Angular vibration is within ±0.02°, and the built-in GPS module improves the gimbal accuracy, making it extremely stabile even while shooting at high speeds.
- Adjusting settings is easier with the built-in touch panel, and it also displays the Ronin 2’s working status.
- A dual battery system and support for hot swapping allows for continuous operation when replacing batteries. With fully charged TB50 Intelligent Batteries, the Ronin 2 can power a camera and the whole system for 2.5 hours.
- Power and video signal are transmitted through the built-in slip ring. The Ronin 2 comes with several accessory ports and supports the DJI Focus system, lens hoods, wireless video downlinks, and monitors.
- Transmits signal at 2.4 GHz and 5.8 GHz to improve transmission stability.
- The brand new Ronin 2 app can adjust settings and also activate multiple intelligent features such as Track and CamAnchor.
Ronin 2 exists to let filmmakers capture the scene they see in their mind. Upgraded high torque motors allow it to support a wider range of cameras, resist high winds and G-forces caused when mounted to a car and keep it moving smoothly in flight.
Whether it’s a simple DSLR or a professional camera with cinema grade glass with all the accessories mounted, Ronin 2 will stabilize the build.
Higher Torque, More Power, Same Precision:
With up to eight times more powerful motors than previous iterations, the Ronin 2 can withstand sustained speeds of over 75mph with camera builds as heavy as 30lbs. We’ve increased power without sacrificing control. With encoded motors and extreme precision, the same 0.02° of accuracy remains.
With the new Ronin power hub, essential accessories such as DJI Focus and wireless video transmission systems could gain power and communicate data with Ronin 2.
A newly designed detachable Grip allows Ronin 2 to stand up on its own and is easily separated when the lower part of the hand grip is not needed. Ronin 2 is also highly compatible with cable cams, drones, cranes, Steadicams and more.
The simplicity of Ronin has been amplified with Ronin 2, making setup and use easier than ever. Everything, from mounting cameras to balancing and tuning, powering accessories and transportation has been tweaked and refined for ease and speed.
A dedicated ultra-bright touch screen for settings and adjustments has been integrated into the Ronin 2, streamlining and accelerating gimbal setup. Tactile buttons including motor pause are now easily within reach.
The extensively refined, redesigned and expanded Gimbal Assistant app, helps to create content with minimum effort via new features such as CamAnchor, Timelapse, and Panorama, providing a more intuitive and easier to use full control system for the Ronin 2.
Enhanced intelligence means filmmakers can get shots with Ronin 2 that would once have needed specialist expertise or additional equipment, from total smoothness control to studio-oriented smart features.
Power systems are now tightly integrated into Ronin 2, capable of powering its motors and the attached camera and accessories without dangling cables or multiple power systems. As it uses a dual battery system, filmmakers can hot swap to keep the camera and accessories powered and maximize shooting time.
Two batteries on the Ronin 2, and the ability to run with only one allows batteries to be charged and swapped without interrupting a shoot.
Installed cameras, monitors, or accessories, including the DJI Focus, can be powered by the Ronin 2 batteries through integrated cabling and ports, eliminating dangling cables.
Every element of Ronin 2 has been designed to maximize reliability, from materials to the splash-proof enclosed motor design, cable management, and redundancy. All of this creates a system that shines in the most demanding of shooting environments.
Carbon Fibre Build:
A carbon fibre build enables Ronin 2 to perform well in extreme weather conditions. Light and durable, it is reliable in the most testing scenarios.
Robust and resilient in extreme weather conditions, the Ronin 2’s self-heating batteries ensure stable power output for high-performance in temperatures as low as -4°F (-20°C) and high heat environments. Dual batteries capable of operating simultaneously and independently provide complete redundancy, keeping the shoot going.
|Built-In Functions||Operation Modes; Underslung Mode, Upright Mode, Briefcase|
|Handheld, Car Mount, Aerial, Tripod, & Steadicam Mode|
|Built-in, independent IMU module|
|DJI Advanced 32-Bit ARM Processor|
|DJI Specialized Gimbal Drive Motors with Encoders|
|Dual Battery System|
|D-Bus Receiver Supported|
|2.4 GHz/5.8 GHz Receiver|
|Built-in Touch Panel|
|USB Type-C Connection|
|Power and Video Signal through Slip Ring|
|Mechanical and Electrical Characteristics:|
|Working Current||Static current: 300 mA (@22.8 V)|
|Dynamic current: 500 mA (@22.8 V)|
|Locked motor current: Max 15 A (@22.8 V)|
|Run Time||8 hours|
|2.5 hours (when powering gimbal, camera and accessories at the same time)|
|Operating Temperature||-4 degF - 122degF (-20 degC - 50 degC)|
|Weight||Including handle bar: 12 lb (5.5 kg)|
|Excluding handle bar: 9 lb (4.2 kg)|
|Gimbal Dimensions||Excluding handle bar: 350 mm (W) x 416 mm (D) x 530|
|Including handle bar: 630 mm (W) x 416 mm (D) x 720 mm (H)|
|Camera Tray Dimensions||Maximum depth from the center of gravity on|
|camera base plate: 245 mm|
|Maximum height measured from top of the camera base plate: 165 mm|
|Maximum width: 180 mm|
|Accessory Power Connections||14.4 V x 4 Camera Cage (Combined 8 A),|
|12.6 V x 2 Pan Motor (Combined 4 A), 12.6 V x1 P-Tap (8 A)|
|GCU Input Power||Intelligent Battery: 4280 mAh-22.8 V|
|Connections||2.4 GHz/5.8 GHz Remote Control, Bluetooth 4.0, USB Type-C|
|PC Assistant Software Requirements||Windows 7 or above; Mac OS X 10.11 or|
|Mobile Assistant Software Requirements||iOS 9 or above; Android 4.4 or above|
|Load Weight (Reference Value)||30 lbs (13.6 kg)|
|Angular Vibration Range||plus/ minus 0.02 deg|
|Maximum Controlled Rotation Speed||Pan axis: 400 deg/s|
|Tilt axis: 360 deg/s|
|Roll axis: 360 deg/s|
|Mechanical Endpoint Range||Pan axis control: 360 deg continuous rotation|
|Tilt axis control: plus/ minus 135 deg|
|Roll axis control: plus/ minus 220 deg|
|Controlled Rotation Range||Pan axis control: 360 deg continuous rotation|
|Tilt axis control: +45 deg to -135 deg|
|Roll axis control: plus/ minus 45 deg|
|Compatible Cameras||RED Dragon, ARRI Alexa Mini, Blackmagic URSA Mini, Canon C300, Sony FS7|